Delivered earlier than expected, the item came as promised. The material quality is fine, and it does it's job pretty well. It was very easy to assemble and all parts arrived well. I printed a first test print of 1 hour with the printer enclosed in it and the hygrometer showed it reaching ~29 degrees celsius, hopefully it won't rise much higher in longer prints. Overall, good value for money Read more

Man, this is a solid third party home for a Bambu. The TOPCUBE enclosure looks clean on a desk, keeps dust off the rails, and gives the printer a steadier environment so parts come out with fewer random curls and layer splits. The acrylic stays clear, the seams meet well, and the door action feels confident rather than flimsy. It makes the whole setup look finished rather than improvised. 🙂 Heat management is the big win. By trapping warmth you get a gentler climate around the print which calms ABS and ASA and helps PETG keep edges tight. Warping and draft scars drop because the air is not slapping the part every time your HVAC kicks on. For PLA you can crack the door a touch so it stays crisp and glossy. The net effect is fewer restarts and a higher keep rate on tricky shapes. 🙂 Noise comes down from a room filling whirr to a background hum. You still hear fast moves and fans, but it blends into the room in a way that is easier to live with if you print near where you work or sleep. Odor is easier to manage too. The enclosure gives you a defined place to mount a small carbon pad or route a hose to a window if you want extra venting for materials with stronger smell. 🙂 The daily use details are thoughtful. There is room to position spools where the path stays smooth, pass a cable through without pinching it, and open the lid to get at the toolhead without feeling boxed in. Bed scraping and nozzle swaps do not turn into a wrestling match. If you run multi color, just keep the filament angles gentle and give yourself a little slack loop so the path stays happy. 🙂 Assembly is straightforward if you lay the panels out, square the frame as you go, and snug fasteners gradually. Wipe the panels before you peel the film so you avoid static dust, and finish by checking door alignment so magnets meet cleanly. Put a small thermometer inside for the first week so you get a feel for how warm your room and materials like to run. 🙂 Safety and common sense still rule. Do not block fan intakes, leave space behind for airflow, and avoid draping fabric over the enclosure. A compact smoke alarm in the room and a small ABC extinguisher nearby are smart additions for any printer, enclosure or not. Printing unattended is never truly hands off, so use your camera or pause jobs if you will be away for long stretches. 🙂 Bottom line. If you want steadier temperatures, fewer warps on engineering plastics, quieter operation, and a cleaner look for your Bambu, the TOPCUBE enclosure delivers that package without drama. It turns a fast printer into a polite roommate and opens the door to materials that are fussy in open air. 🙂❤️ Read more

Update 10/19: The manufacturer has sent me a replacement led light. The one sized for the normal A1 actually encloses the A1 mini and the AMS lite unit pretty well if you put it on its side. It keeps the PLA smell in and somewhat reduces the whining from the fans. The fabric is nice and thick feeling but the plastic fittings for the fiberglass rods were loose and kept falling off when I was assembling it. The rods were also covered with fiberglass dust and it made my hands itchy. Definitely wear gloves when assembling this. It was missing the included LED light. Read more

庫内温度は37度ぐらいまでしかあがりません。 ABS等印刷時には匂いが外にもれないのでそこはgood Read more

Very easy to put together and keeps the fumes out of my work area. I was able to add a exhaust fan to it which takes the fumes out even faster. Love that it has a humidity control on the front and a temperature gauge so you can see what's going on. The light really does work well... Great value for your money Read more