The installation method of the fender mainly includes the following steps:
1. Clean the position: Before installation, the position where the fender is installed needs to be cleaned. You can use a wet towel or other tools to wipe it to ensure the firmness and effectiveness of the installation.
2. Remove the screws: Use a suitable screwdriver to unscrew the screws at the position where the fender is installed so that the new fender can be installed.
3. Place the fender: Place the fender of the corresponding model at the installation position. Fenders are divided into front and rear, and the fenders of the rear wheels are usually larger. When placing the fender, pay attention to the outer edge of the fender being parallel to the outer edge of the tire.
4. Tighten the screws: After placing the rear fender, use a screwdriver to screw the screws back in and make sure to tighten them to prevent the fender from loosening and falling off due to the bumps of the car body during driving.
In addition, depending on the different models and fender designs, additional steps may be required, such as drilling holes and adjusting the position. The fender installation positions of some car models may not have holes drilled in advance. In this case, it is recommended that the owner go to a professional repair shop to drill the holes first.