This is a great magnetic plate. It fit well to my already magnetic build plate. Took me a few prints before I could get anything to stick but it's been running fine since. Not sure how long it will last though but so far so good Read more

The surface of this 3D printer build plate is truly remarkable, offering a glass-like smoothness to my prints and showcasing a mesmerizing holographic design that transfers seamlessly onto the print. Using PLA at 200 degrees with the build plate heated to 60 degrees, the prints adhere flawlessly with no lifts and perfect adhesion on the initial layer. Each side features a unique design; one with beams and the other with a hex rainbow pattern. It's worth noting that there's a protective film on both sides, which must be removed before printing on either side. Additionally, it's crucial to wait for the build plate to cool down to room temperature before removing the finished print to avoid damaging the surface. The surface does retain a shadow impression from the first print, and subsequent prints have a tiny impression from the first print, that being said it still is the most versatile and my now goto surface for 3D printing as the H1H material acts like glue to PLA filament and the model that is printed on top of it never lifts while printing. You will have to set the nozzle Z axis offset a bit as to not damage the build plate from any kind of scratching from the nozzle to keep the surface glass like. Even on matte filaments, it still makes the surface gloss and glass like all while transferring the hologram pattern. Read more

I like using PEI-coated steel plates on my modified Ender 3 Pro 3D printer. They generally work very well and I like the use of magnets to hold the plate in place on the bed of the 3D printer – this makes it very easy to install and remove. This print bed plate has a smooth coating of H1H on each of its sides. I’m not very familiar with this material and a quick online search didn’t seem to help. It seems that this plate is made with very fine microgrooves in it which gives it good adhesion and high temperature tolerance. It also creates a holographic type effect on the surface making these plates look really groovy. The plate is shipped in a plain cardboard box sealed inside a bubble-wrap envelope. Protective films are applied to each of the two surfaces which must be pulled off before use. The plate is 235mm x 235mm which is just the right size for my 3D printer. It doesn’t come with a magnetic stick-on pad – I have plenty of these already and don’t want to pay for more. There are notches cut into the rear of the plate – presumably to help with locating the plate on other Ender 3 printers. These do slightly reduce the available print area on my printer. There are no instructions supplied, so for my first test, I tried Amazon Basics TPU at a bed temperature of 70°C, a nozzle temperature of 220°C, and a print speed of 50mm/s. Adhesion was quite weak – although the bases of the printed models came out very smooth, there was some curling at the edges. I applied PVP glue stick to the plate and these issues were fully fixed. This is a very visually striking plate which, although it doesn’t include a magnetic pad, is still offered at a premium price. However, it appears to work well – especially after applying glue stick. I will be putting this plate to good use. Read more

it works on my neptune 4 pro but bed adheasion not as good as id like Read more

I would recommend this build plate to any seasoned maker. I would recommend that you be patient with honing in / calibrating your different materials for this. I have adjusted my printer bed to 65⁰C for my Creality PLA and Creality Hyper PLA. So far I've been able to print at pretty high speeds though without any loss of quality or layer adhesion. I give my plate a quick clean with 90% IPA and a microfiber cloth after every print. I'm about 20 prints in and I haven't had any issues. Prints come off smooth and glossy with a cool holographic looking pattern on them. Read more