No tiene modo percutor pero es un instrument litio de alta calidad y conecte su función a la perfección. Read more

I already own a Makita right angle drill, so I purchased this to use in tight spaces. My first use was yesterday when I was installing a sconce light in a basement stairway for a customer. After cutting the first of two holes for old work electrical boxes, I discovered that there was a 2" X 4" fire block just below the first hole. Since I was running the electrical wires from the unfinished basement, a hole had to be cut from above. Out came my new Dewalt right angle attachment. I inserted a spade bit into the attachment and went to work. Initially, I had to start drilling the hole on an angle until the attachment would fit completely in the hole. I then straightened out the attachment and completed the hole with little effort. I did the same for the second box hole and fished all wire though the holes. There is no way my Makita right angle drill would have worked. I own a 48" flexible drill bit with a guide tool that is made for these issues, but it's hard to control and I have drilled right through an adjacent wall while using this bit. When installing over the range microwave ovens, the two mounting holes are frequently next to cabinet edges, and this right angle attachment enables straight, clean holes to be drilled from inside the cabinet. I also plan to use this attachment for driving screws in tight spaces. The attachment is well built and easy to use except for the bit holder. A small drill bit or screw must be inserted into the top of the attachment in order to release the bit. It is magnetized to keep your drive or drill bits from falling to the floor. Overall, this is a must have tool for occasional use. Note, this attachment does not have a chuck, so hex shank drive and drill bits can only be used. Read more

I've tried quite a few of these DeWalt 90 angle attachments over the years and have found that they are the best among what I have tried. The top (yellow) attachment finally failed and I purchased both the item here as well as the 4 in1 kit with the flex extension. For most of the work I do, this basic attachment serves every purpose. Occasionally I'll combine this 90 degree with a 6" or 12" rigid extension from Diablo, that really opens up a lot of options for tough spaces. When all else fails, the 4 in 1 kit can sometimes be the only tool for the job. Quality of all of these is accurate. Nice durability. Good magnetic strength. This one is also the most compact which is helpful. Again, each model serves its purpose. If you wanted to compare it to the 4 in 1 that can be found here https://amzn.to/48E85DZ The diablo extensions pictured can be found here (6") https://amzn.to/43Y8oae (12") https://amzn.to/4rulyWG Read more

great tool. As a sprinkler fitter I am constantly working up in tight ceiling spaces during fit off. This right angle attachment has already proved it's worth on a number of times in the short time I've had it. It has enough torque to easily put self drill screws the the metal brackets we fit off to. Just a note that the head does tend to rotate when drilling but with a bit of hand pressure on the right angle attachment you can overcome this Read more

Works well good item Read more

Discovered this tool from a friend when I needed to drive in screws in tight spot. After using his, I immediately bought one for myself. This low profile tool allows you to use your drill or driver to drive screws, nuts or bolts in tight spaces easily. It's small and compact. Build quality, like most all DeWalt products, is excellent and should last a long time. The hex attachment piece makes it easy to attach to your impact driver. Buy one for yourself or for a friend, they will thank you for it. Read more

These come in handy more than you expect. I work as a pipe fitter and they are extremely durable. Only reason I had to buy a new one is because someone stole my last one! Compact and great design. Read more

sehr gute Qualität und schnelle Lieferung, alles Bestens, immer wieder gerne! Read more

Vous avez une perceuse/visseuse, il vous faut absolument cette outils tellement pratique pour accéder a des endroits étroits. Read more

Very useful tool! Working great Read more

Works well. Good design. Good price. Nice torque. Accuracy is nice. Read more

El cuerpo es muy resistente, la punta embona muy bien y se sostiene porque está imantado. Es largo y eso funciona bien porque puedes sostenerlo para empujar a la hora de atornillar. Read more

Good Read more

Very tough built. However not suitable to use standard bits due to deep holder. Must use long screw bits. Read more

Very good but the price is high. Read more

As described Read more

all good Read more

Excellent tool Read more

EXcellent Read more