Excellent! The impact is awesome I have a few now and this is my first made in USA edition and the chuck is a little better fitting than my others. Gotta like that. The drill is a beast for cordless the chuck is nice and the clutch is good. I prefer the compact xr drill to this for lightweight ease of handling and it’s high power but the clutch is too weak on the compact and the spring chuck is annoying. This model has a solid non spring chuck and the three speeds is also a plus. The weight is hefty for one handed use though. Ergonomics are superb and battery life is solid. Can’t go wrong with this kit the 4.0ah batteries are capable and the impact is so good, really so so good I use these impacts all the time. I have read comments about the first power setting being useless but I use it regularly. I work with a lot of sheet metal that is screwed together with small sheet metal screws. Setting one gets it done with no impacts and no stripped threads. I think the complaints are from people who think it’s no good if it’s not clacking away impacting. Level three is potent, I can almost bust a grade five 3/8” bolt/nut with it. Recommended Read more

مرره كويس و قوي و يتحمل الشغل لكن فيه كم مشكله مشكلته الاولى انه مره قوي و اذا استعملت اسرع قوه له ممكن يقطملك بعض الصواميل او حتى انه يكسر الادابتر نفسه هذي المره الثالثه اللي اطلب له ادابتور اذا تبي تستخدمه للسيارات اشتر شي اقوى و تركب عليه الصاموله او السوكيت على طول لانه راح يكسر ينكسر معك بعد فتره ولا هو رجاااال صواميل الجنوط ما يفكها و بعض الاشياء اللي مشدوده شد قوي لكل اذا للخشب و التكييف تقريبا ممتاز لكن انك تشتري الافضل منه راح يكون احسن و الفرق مو ذاك الزود ف اشتر الغالي شوي احسن لك Read more

I've been running these drills for about 9 months now. Shipping time was supposed to be 4-6 weeks. I ordered them tuesday night, wed they shipped, ETA monday. Got home friday, they were already there. I bought them on sale to replace a heavily used set of 18v drills. I work commercial construction, and my impact gets used far more than my hammer most days. Impact: I didn't really want the 3 speed, figured it was just one more thing to break. However, it is incredibly useful. Low allows you to safely drive small, fragile screws without stripping them, med is normal, and high is only really usable for long or large screws, it sinks them too fast to control. Great for shooting lags, or 4" deck screws. Brushless motor allows me to often go a couple days on a single 4ah battery. Drill: 3 speed transmission will out-torque most drills in low, and out-spin them in high. Electronic clutch stops the motor when using it, instead of just slipping and grinding like old style ones. Otherwise, it performs pretty similar to my old 18v did, but lighter, longer battery life, and has a light. The light on the drill was a nice surprise. It has a switch on the handle similar to the impact, that allows you to change the brightness of the light. The 2 lower settings work like a normal drill light, but the brightest one has the light stay on for 20 min after pulling the trigger, while being brighter than many flashlights, with a fairly wide beam. This allows it to serve as a makeshift worklight, and works great. Batteries/charger: Not much to say, lighter and more compact than the old 18v XRPs, charge faster and last a lot longer. They seem to handle the cold ok, I used them a few times in -20c or lower, though not often. Mine came with the 4.0AH batteries, though another review said they got 5's. Side note- Drills come with a belt clip, but neither one has a bit holder. You may want to order a couple at the same time, they attach to the opposite side to the clip Read more

I've had Dewalt drills and other tools before (still do), and I have always been very pleased. The last set of drills I had was a comparable Milwaukee 18 volt set that I used for the last 8 years or so. I bought them when I started building my new house. They worked very well, and I have no complaints. Lately though they stared losing battery power (both batteries), so I decided to get new drills. The drills I got are the extra run time 20 volt set. One of the reasons I decided on the extra run time (the larger batteries on both drills opposed to one large and one small, shorter run time battery) is because I already have the 1/2" Dewalt 20 volt impact driver with the same batteries. Now I have 3 batteries, and 2 chargers, all the same. After reading some of the other reviews, I was hesitant to get these drills because of complaints about loose batteries, switch problems, and the chuck apparently not tightening down (or whatever). On those things I have comments. On the loose battery issue... I see that the battery moves around a bit by about a 32nd of an inch. After having the impact drill already with the same battery setup, I never noticed that until it was suggested in the reviews on these drills. I went out to my shop and looked at it, and sure it does that, but it is not noticeable at all (like I said, had it not been suggested, I would not have noticed!). So when I got these drills, they are exactly the same movement; no big deal (not even a small deal). On the switching issue... I have been a contractor for 20 years building aluminum patio covers, etc. I have used many different brands and sizes of cordless drills over the years. I have never had one that didn't need to be turned on for a second to get the gears to sort of "mesh" (for lack of a better term). Every drill I have ever used, period. When building those patio covers you are running in hundreds of screws a day, and drilling hundreds of holes, every day switching from speed to torque. There is no issue here. On the chuck issue, I cannot speak for the drill that apparently has an issue, as the chuck that came with these drills has the black, all steel, knurled chuck (vs. the one with the black plastic grip and the shiny chrome looking chuck. I believe those are the ones that get the complaints. Mine works perfectly. I am no longer a contractor, but (besides building a lot of stuff) I am in the process of converting a 45 foot bus into a motor home. This will be about a 2-3 year project, and I am looking forward to using these new drills. They are nice and heavy, and balanced (even with the extra run sized battery, the drill motor is heavier than the battery, providing good balance). Keep in mind that a heavy drill doesn't kick back as easy as a light one (when the drill bit suddenly gets stuck in the material). Also, I don't know how necessary the "3 speeds" are, but I'm ok with them. I don't want to forget to mention the little LED light that comes on when you drill. I LOVE the 3 brightness levels. The highest one puts me in mind of those high powered flashlights. It is VERY bright, and will come in handy. I highly recommend these drills. Thank you, Glennman Read more

Over all is good the only problem is 110v charger...both unit is very good Read more

It's really cool.. Read more

It's a USA 🇺🇸 made which is the best of the best I'm really happy with this combo kit And shipping to UAE was super fast Note: you will need a voltage converter adapter so you can charge the batteries because the charger that comes with it requires 110 voltage output only Read more

I bought these tools for my small project at home, I need to use both driver and drill. I bought this combo kit and so far working great. The only thing I missed out was the charger input watts. I stay in 240 watt country and this products were made in USA 🇺🇸 and charger came with 110 watts. To solve this I had to buy converter to be able to use 110 watts 😅 Read more

No doubt ever!!! Dewalt is the best!!! And made in USA!!!! Read more